16 November 2026
DCR stands for Domestic Content Requirement. A DCR solar panel is one where both the cell and the module are made in India. A non-DCR panel is assembled in India from imported cells, usually Chinese. The difference matters for one reason: government subsidy schemes will only pay out on DCR modules, and DCR modules cost roughly ₹8 to ₹11 more per watt.
That premium is not a brand markup. It comes from a genuine shortage: India has around 37 GW of cell capacity against more than 260 GW of module capacity, so domestic cells are the bottleneck. Below is what the rule actually requires, where the price gap comes from, when you are allowed to skip DCR, and how to check that a panel you have been quoted is genuinely DCR rather than labelled as one.
The requirement is about where the cell was manufactured, not where the panel was assembled. This is the single most common misunderstanding, and it is the one that costs people their subsidy.
A panel made by an Indian company, in an Indian factory, carrying BIS certification, can still be non-DCR. "Made in India" on the box is not the test. Only the cell origin is.
| Module type | Indicative trade price | Eligible for subsidy |
| TOPCon, DCR | ₹22 to ₹28 per watt | Yes |
| TOPCon, non-DCR | ₹13 to ₹18 per watt | No |
| Mono PERC, DCR | ₹19 to ₹24 per watt | Yes |
| Mono PERC, non-DCR | ₹12 to ₹16 per watt | No |
Treat these as a range rather than a rate card. A JMK Research survey in April 2026 put DCR TOPCon at about ₹22.3 per watt against ₹14.2 for ordinary TOPCon, implying a gap near ₹8. Other published figures through 2026 run from ₹8 to ₹11. The spread between sources is wide because some quote before GST and some after, some include freight, and the DCR premium itself moves with cell availability month to month.
The cause is structural. India built module assembly capacity far faster than cell capacity, so every DCR order competes for a small pool of domestic cells. Until cell capacity catches up, the premium holds. Our bifacial panel price guide covers how wattage class and volume move the number as well.
You must use DCR modules if the project touches government money. In practice that means:
The expensive mistake is installing non-DCR panels on a subsidised application and discovering it at inspection, when the system is already on the roof. The subsidy is refused and the panels stay.
For anything you are paying for yourself, non-DCR is perfectly legal and usually the better buy. Commercial and industrial rooftops, open access projects, and any residential system where the owner forgoes the subsidy can all use non-DCR modules.
There is also a formal route for residential consumers. MNRE has clarified that consumers taking net metering under PM Surya Ghar who choose the give-it-up option are exempt from ALMM List-II for cells until 31 March 2027. You give up the subsidy and gain access to cheaper, often higher wattage modules.
Whether that trade works is arithmetic, not opinion. On a 3 kW system the subsidy is ₹78,000 and the DCR premium costs you roughly ₹24,000 to ₹33,000, so taking the subsidy wins comfortably. On a 100 kW commercial rooftop there is no subsidy to lose and the premium would add ₹8 lakh to ₹11 lakh, so non-DCR wins just as clearly. The crossover sits around the point where subsidy stops scaling, which is 3 kW.
Labels are not proof. Four checks, in order of how much they tell you:
If an installer quotes a DCR price but cannot produce a model-specific certificate, treat it as non-DCR until proven otherwise.
For dealers and EPCs the DCR question now shapes stock planning more than brand choice does. Three things follow from the cell shortage.
Two dates matter. The give-it-up exemption from ALMM List-II runs to 31 March 2027, which is also the end of the current PM Surya Ghar period. And Indian cell capacity is expanding fast, with several large plants commissioning through 2026 and 2027.
If that capacity lands as planned, the DCR premium should narrow, because the premium is a supply artefact rather than a cost-of-production difference. Nobody has published a credible date for when the gap closes, so treat any quote promising cheaper DCR "soon" with caution and buy on today's numbers.
The decision is simpler than the terminology suggests. If a subsidy or a government tender is involved, you need DCR and the premium is the cost of access. If you are funding the project yourself, non-DCR is cheaper per watt and legal, and on anything above roughly 3 kW the maths usually favours it.
What is not optional is checking. Get the model-specific certificate before the panels arrive, because the inspection is the wrong moment to discover the cell came from somewhere else.
Credence Solar manufactures BIS-certified N-type TOPCon modules at a 2.2 GW facility in Rajkot. For DCR availability on a specific project, or for module specifications, contact our team or download the product datasheets. Subsidy figures are published on the PM Surya Ghar portal.
A panel where both the solar cell and the module are manufactured in India. The wafer may be imported. Non-DCR panels are assembled in India from imported cells, usually Chinese, and are not eligible for government subsidy schemes.
Roughly ₹8 to ₹11 per watt in 2026. A JMK Research survey in April 2026 put DCR TOPCon near ₹22.3 per watt against ₹14.2 for ordinary TOPCon. The gap moves with domestic cell availability, so confirm current rates before you commit.
No. Subsidised installations must use DCR modules. Consumers who formally give up the subsidy are exempt from ALMM List-II for cells until 31 March 2027, but they receive no subsidy money.
India has around 37 GW of cell manufacturing capacity against more than 260 GW of module capacity, so domestic cells are scarce relative to demand. The premium reflects that shortage rather than a difference in build quality.
Ask for the DCR certificate for the exact model and wattage, check the ALMM listing on the MNRE site for both List-I and List-II, and match the model number on the certificate against the module and the quotation. A generic company letter is not sufficient.
No. BIS registration is a safety and quality requirement that applies to all panels sold in India, DCR or not. They are separate checks and a panel can hold BIS certification while using imported cells.
Non-DCR, in almost every case. There is no residential subsidy to lose on a commercial project, and at 100 kW the DCR premium would add ₹8 lakh to ₹11 lakh for no return. DCR only becomes necessary if the project is tied to a government scheme or tender.