☀️ Download
☀️ Download
Download Credence Solar datasheets, brochures and technical documents for solar modules, PV modules and solar panel size details.
Every Credence datasheet lists the full electrical specification at STC and NOCT, module efficiency, temperature coefficients, cell type and busbar count, module dimensions and weight, mechanical load ratings, connector and cable details, and the certifications the model holds. Use the table below to find the right document, then download the PDF for the complete specification.
| Datasheet | Power range | Cell technology | Construction |
|---|---|---|---|
| TopCon M10R | 580 W to 600 W | n-type TOPCon, half cut | Glass to glass bifacial |
| TopCon G12R | 610 W to 630 W | n-type TOPCon, half cut | Glass to glass bifacial |
| TopCon M10R | 640 W to 660 W | n-type TOPCon, 16BB | Glass to glass bifacial |
| Bifacial G12 | 685 W | Mono PERC, 210 mm, 12BB | Glass to glass bifacial |
| Monofacial G12 | 670 W to 700 W | Mono PERC, 210 mm, 12BB | Glass to backsheet |
| TopCon G12 | 725 W to 745 Wp | n-type TOPCon, 18BB | Glass to glass bifacial |
Every module carries a positive-only power tolerance of 0 to +4.99 W, a bifaciality factor of 80 ±5% on the bifacial ranges, and BIS certification. Credence holds BIS approval up to 745 Wp, the first Indian manufacturer certified at that wattage. For DCR status on a specific project, or for IEC and TUV test reports, contact the team directly.
A 650 W module sits in the TopCon M10R 640 W to 660 W range. For 580 W and 600 W use the TopCon M10R datasheet, for 610 W to 630 W the TopCon G12R, for 685 W the Bifacial G12, for 670 W to 700 W the Monofacial G12, and for 725 W to 745 Wp the TopCon G12 datasheet.
Yes. Enter your name, email and phone number and the PDF downloads immediately. We use the details only to answer technical questions about the module and to send updated datasheets when a specification changes.
Yes. Credence modules carry BIS certification up to 745 Wp and the company is enlisted on the MNRE ALMM List-I. Confirm the exact model against the current ALMM revision before a tender, since enlistment is model specific.
Datasheets cover the types of solar modules Credence Solar manufactures, including TOPCon M10, TOPCon M10R, TOPCon G12, Monofacial G12, and Bifacial G12 ranges.
Each datasheet lists solar panel size and weight, cell size and busbar count, electrical specifications, temperature coefficients, and mechanical load ratings.
A pv module and a pv solar panel refer to the same product category. Both terms describe the solar photovoltaic modules listed for download on this page.
Yes, datasheets are available for every solar module India model currently in production, spanning the TOPCon, Monofacial, and Bifacial ranges.
Datasheets and the company brochure are available directly from the Download section. Project specific documentation may require a few details through the contact form.
A module datasheet covers electrical specifications, physical dimensions and weight, cell technology and busbar count, temperature coefficients, mechanical load ratings, and certification markings.
Reach out to info@credencesolar.com or +91 90330 72969, and the team can share the relevant technical documentation directly.