Hyper Nova N

N - TOPCON Glass to Glass Bifacial - 16BB

650+W

Efficiency up to >23.25%

0~+4.99W

Power Tolerance

Hyper Nova N 650+W TOPCon Bifacial Solar Panel - Credence Solar

Hyper Nova N solar panels from credence solar are your gateway to a world of clean, efficient and sustainable energy.

Sun icon
Hyper Nova N TOPCon Bifacial Solar Module 650+W - Credence Solar

🌞 Introducing HyperNova N

TOPCon Solar Panel
Technology with 16BB Design

Credence Hyper Nova N, a Topcon bifacial PV module, delivers up to 650Wp with 23.5% efficiency. Built with half-cut cells, positive tolerance and premium BOM for maximum solar harvest.”

Half-cut cell design icon

Half Cut Cell Design
with Multi Bus Bar Technology

High power generation icon

High Power Generation

Weak light performance icon

Excellent Weak Light Performance

Lower LCOE and BOS icon

Lower LCOE & BOS

Hyper Nova N TOPCon Bifacial Solar Panel Diagram - Credence Solar

🌱 Better Bifaciality

Advanced Solar PV Modules
with TOPCon Technology

Hyper Nova N panels use 182.25×183.75mm 16BB Topcon half-cut cells with 80%±5 bifaciality. The glass-to-glass build makes them ideal for all projects.

Low LID icon

Low LID

Bifaciality factor icon

Bifaciality Factor of
80 ± 5%

Mechanical load icon

Enhanced Mechanical
Load Capaciity

Temperature coefficient icon

Better Temperature
Co-efficient

🌞 Best in performance

TOPCon Solar Modules Built for
Low-Light Performance

Frequently Asked Questions

A Topcon solar panel uses Tunnel Oxide Passivated Contact cell technology to cut electron recombination losses. Hyper Nova N applies this in a glass to glass bifacial format, delivering 650 plus W at over 23.25 percent efficiency.

The solar cell in Hyper Nova N reaches over 23.25 percent module efficiency, using N Type TOPCon half cut cells with 16BB busbar technology.

Topcon describes the cell technology, while bifacial describes the panel construction that captures light on both sides. Hyper Nova N combines both, using TOPCon cells in a bifacial glass to glass module.

Hyper Nova N is a solar photovoltaic module, also referred to as a pv module, built as a high wattage TOPCon bifacial panel for C&I and utility scale projects.

Hyper Nova N uses 182.25 by 183.75 mm half cut N Type TOPCon cells.

Hyper Nova N carries a bifaciality factor of 80 plus or minus 5 percent, adding meaningful rear side energy generation on top of front side output.

Datasheets sit in the Download section. For bulk pricing and supply timelines, contact the Credence Solar team at +91 90330 72969 or info@credencesolar.com.